VI-1500 Home Storage & UPS System
Product Features:
- High Voltage and Low Voltage Protection
- High level of Energy Efficiency
- Less Response Time
- Isolation Transformer
- Stagnant as well as Wall Mounting
- Pure Sine Wave Output
- Overload Protection
- Bi-Directional technology
- BMS Facility
- Maintenance Free
Product Specification:
| Specification | VI-1500 |
| Capacity | 1000VA |
| Max Load Capacity In Watts | 800W |
| Input | |
| Input Voltage (INV Mode) | 120V - 270V |
| Input Voltage (UPSMode) | 160V - 270V |
| Nominal Input Battery Voltage | 14.4V |
| Output | |
| Output Voltage (Mains Mode) | Same as input |
| Output Voltage (INV/ UPSMode) | 230V±5% |
| Output Frequency (INV/ UPSMode) | 50Hz |
| Output Waveform (Mains Mode) | Same as input |
| Output Waveform (INV/ UPSMode) | Pure Sine Wave |
| Battery | |
| Battery Range | 12.8V/ 104Ah |
| Battery Type | Li-ion (Inbuilt) |
| Battery Time | 3.5 Hrs for 50% Load |
| Protections | |
| Battery Protection | Battery Management System (BMS) |
| Output Overload Protection | 120% |
| Output Overload Protection | 1.2 |
| Output Short Circuit Protection | 300% |
| Battery Higher Cut-off Voltage (Adjustable) | 16.8V |
| Battery Lower Cut-off Voltage (Adjustable) | 12.6V |
| System Overload / Short Circuits Protections | Available |
| Reverse Panel Protection | Available |
| Thermal Protection | Both in Grid Charging & Backup Mode |
| DC Input Volt. High Cut Protection/ Recover | Available |
| Mains Re-Connect Voltage | 16.5V + 0.3 V DC |
| Mains Dis-Connect Voltage | 16.8V + 0.3 V DC |
| Operating Temperature | 0⁰-63⁰C |
| Cooling Fan | Available |
| Warranty | |
| System Service Warranty | 3 Years |
| Battery Warranty | 5 Years |
| Battery Life | 10 Years |
| Weight & Dimension | |
| Weight (Kgs) | 20 kg |
| Dimension (H*W*D) | 575*300*250 mm |
- Li-Ion batteries are Hazardous be cautious while using/handling.
- Li-Ion batteries have high energy and power density and are explosive in nature.
- Misusing/mishandling the battery may cause the battery to get hot, explode, or ignite and can cause serious injury.
- No protection circuit installed.
- Make sure to use battery strictly within the operating limits defined by the manufacturer.
- Do not place battery near fire or source of heat.
- Do not expose the battery to Water / rain or any other liquid.
- Do not connect the positive and negative terminal (Short Circuit) of the battery pack.
- Make sure that the battery terminals are covered or protected against the short circuit.
- Check the positive and negative terminal polarity before connecting the battery with the application / device. Do not connect with Reverse Polarity.
- Do not overcharge/discharge the battery, make sure to use the correct rating charger.
- Do not Use the Lipo Battery Charger.
- Do not open, disassemble or modify the supplied battery pack in any way, in case of any issue contact the supplier/ manufacturer.
- Do not penetrate the battery with nails, strike the battery with a hammer, step on the battery, or otherwise subject it to strong impacts or shocks.
- Do not throw the battery in trash. Recycle or dispose of in accordance to the local regulations. If battery pack not in regular use than please charge it once in every 30 days.