Telecom Battery Pack
Features :
- Reliable & safe LiFePO4 cell technology
- Advance Remote Asset Services RAS (Optional)
- Effective failure prevention and analytics with balance of life with RAS
- Communication through RS485 / RS232
- Suitable for multi-unit parallel connection (up to 15 modules)
- State-of-art BMS with built-in advance protections
- Higher operating temperature range
- High cycle life
- High efficiency
- Standardized 19” rack-mountable
ADVANCE BAT TERY MANAGEMENT SYSTEM
- RS485 & RS232 communication ports
- Dial switch for address set-up
- System reset button
- Dry contacts
- SOC and operating status LED
- Failure warning display LED
- SOH evaluation for battery
COMMUNICATION & MONITORING
- Cell Balance Management
- Warning & Protection for Over charge & discharge for cell & battery pack High/low temperature during charge & discharge
- Short circuit
- Reverse Polarity
- Charge & Discharge Over Current
TECHNICAL SPECIFICATIONS
| 48 V 100Ah | |
| Cell Type | LiFeP04 |
| Pack Configuration | 15S1P |
| Rated Voltage | 48V |
| Rated Capacity (at standard discharge, 25° C ) | 100Ah |
| kWh Rating | 4.8kWh |
| Standard Charge Current | 20A |
| Max. Continuous Charge Current | 50A |
| Charge/Discharge Cut-off Voltage | 54/44V |
| Standard Discharge Current | 20A |
| Max. Continuous Discharge Current | 50A |
| Max. Discharge Current( 1 cycle/day ) | 100A |
| Working Temperature (Charge) | 0 to 45° C |
| Working Temperature (Discharge) | -20 to 55° C |
| Cycle Life ( at 80% DoD, 25° C ) | > 3500 |
| Charge/Discharge Efficiency | > 95% |
| Communication Ports | RS485/RS232 |
| IP Class | IP20 |
| Dimension in mm ( LxWxH ) | 410 x 442 x 177.5 ( 4U ) |
| Weight (kg) | ~45 |
Note: Performance parameters like cycle life, capacity, efficiency etc. mentioned are with standard charge and discharge rate and 25°C operating temperature.
- Li-Ion batteries are Hazardous be cautious while using/handling.
- Li-Ion batteries have high energy and power density and are explosive in nature.
- Misusing/mishandling the battery may cause the battery to get hot, explode, or ignite and can cause serious injury.
- No protection circuit installed.
- Make sure to use battery strictly within the operating limits defined by the manufacturer.
- Do not place battery near fire or source of heat.
- Do not expose the battery to Water / rain or any other liquid.
- Do not connect the positive and negative terminal (Short Circuit) of the battery pack.
- Make sure that the battery terminals are covered or protected against the short circuit.
- Check the positive and negative terminal polarity before connecting the battery with the application / device. Do not connect with Reverse Polarity.
- Do not overcharge/discharge the battery, make sure to use the correct rating charger.
- Do not Use the Lipo Battery Charger.
- Do not open, disassemble or modify the supplied battery pack in any way, in case of any issue contact the supplier/ manufacturer.
- Do not penetrate the battery with nails, strike the battery with a hammer, step on the battery, or otherwise subject it to strong impacts or shocks.
- Do not throw the battery in trash. Recycle or dispose of in accordance to the local regulations. If battery pack not in regular use than please charge it once in every 30 days.